Resetting canon i80 printer for waste ink tank absorber procedure:

1.  Turn off the printer. Press and hold the Resume/Cancel and Power buttons at the same time.

2.  Release the Resume/Cancel button. (continue to hold down the power button)

3.  While continuing to hold down the power button press the Resume/Cancel button 3 times then release both buttons. Continue Reading »
Resetting Canon i80 Waste Ink Tank Absorber

How to reset waste tank full error in Canon Smartbase MP730 procedures:

1. Hit the “menu”: Key
2. Hit “Copy” Key
3. Hit “#” Key
4. Scroll thru the menu headings until you come to “Test Mode” – 12th heading Continue Reading »
Resetting Waste Ink Tank Canon Smartbase MP730

Resetting Canon Printer iP1700 and Canon printer iP1300 errors overflow tank.  Resetting errors overflow tank “for the collection of waste ink” this procedure maybe the same with Canon iP1100, but different in software utility service, you can find link for downloading the utility service in the bottom of this article.

Procedure to Reset Ink Tank Full Error for Canon IP1700
First Step (Hardware Reset)

1. Turn Off the printer, and then take off the cable power.
2. Push and hold the power button (use your fore finger to hold the power button).
3. Connect again the power cable.
4. Use your middle finger to push the resume button 2 times.
5. Release the power button.
6. Finish. you have finised the first step to reset Ink Tank Full Error (Blink Error).

Permanent Reset with Software:

1. Run GeneralTool.exe
2. At USB Port choose your printer port.
3. Click Lock Release
4. Check EEPROM CLEAR
5. Put in blank paper for printing. And then click Test Pattern 1 button
6. It’s All Done. Your Printer IP1700  back normal again.

[Downloading Utility Service for Canon PIXMA iP1300 printers / iP1700]

Canon F600 Resetter Code

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice Continue Reading »
Printer Resetter Canon F600