Resetting Canon Pixma IP 3300

Reseting Canon Pixma IP 3300 Procedure:

First we must enter the service mode, steps for entering service mode:

1. Turn printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head.

We are in the service mode right now, then steps for resetting EEPROM

Press RESUME once then POWER to execute
It will print head test print. If you want to check clogging problems in depth.

Press RESUME twice then POWER to execute
This will print EEPROM information ink usage etc.

Press RESUME three times then POWER to execute
It will reinitialize (reset) EEPROM

Press RESUME twice then POWER to execute
It will print EEPROM information once more, you should compare it with your first print. All zeroes should be all over the place.
That means your EEPROM is reset.

Good Luck!