Canon Printer iP2200 / Canon Printer iP1600 / Canon printer iP1200 Resetting errors overflow tank

Resetting errors overflow tank “for the collection of waste ink” for Canon Printer iP2200 / Canon printer iP1200 / Resetting Canon printer iP1600. Link for downloading the utility service in the bottom of this article.

1. Turn off the printer and disconnect the power cord.
2. Click the book. GDL. NOT releasing her, connect the power cord.
3. It is still not releasing the book. GDL. press 2 times book. Abstract.
4. Release both buttons.
5. Then indication errors must cease.
6. Delete all files with the program attribute Only Reid (if it exists)
7. Run this program (GeneralTool.exe file)
8. Choose the printer port in the box USB Port
9. Click the book. DEVICE ID, to verify that the program correctly identified the printer model.
10. press the keys. EEP-ROM INFORMATION, verify that the meter deep Dx indeed equal to or greater than 100.0
11. In the window CLEAR WASTE INK COUNTER press the MAIN and PLATEN. By pressing the button LED printer should mignut.
12. Check in the EEP-ROM INFORMATION Dx value, it must be equal to “0″ or more units.
Exit from the program. Turn off the printer. Pop the power cord. Click the book. GDL and keep it off until the indicator does not (completely discharged capacitors in BP)
Add a printer. Confirm that there is no indication of errors.
NOTE. Kn. LOCK RELEASE unlocks the buttons and functions SET DESTINATION ENDURANCE MODE. If you do not need to change the printer model and test the printer in “load”, it does not need to press.
Good luck.

[Download utility service for canon ip2200/ip1600/ip1200]