Before clearing the memory Xerox Phaser 3200MFP Make sure all fax jobs have been completed

1. Press the [Menu] button on the Control Panel until ‘Maintenance’ is displayed on the top line of the Display Screen.
2. Press the [Left] or [Right] arrow button on the Control Panel until ‘Clear Memory’ is displayed.
3. Press the [Enter] button on the Control Panel.
4. Press the [Left] or [Right] arrow button until the feature to be cleared is displayed.
5. Press the [Enter] button. The feature will be cleared from memory.
6. If necessary, repeat steps 4 and 5 to clear another feature from memory.
7. Press the [Stop / Clear] button on the Control Panel to return to the Standby mode. Continue Reading »
Reset Features Memory Xerox Phaser 3200MFP

1. Press the [Menu] button on the Control Panel until ‘Maintenance’ is displayed on the top line of the Display Screen.
2. Press the [Left] or [Right] arrow button on the Control Panel until ‘Clean Drum’ is displayed.
3. Press the [Enter] button on the Control Panel twice. A cleaning page will print. Toner (Dry Ink) particles on the OPC Drum will be affixed to the paper.
4. Repeat steps 1 - 3 until the cleaning page prints without any Toner particles. Continue Reading »
Clean the Organic Photo Conductor (OPC) Drum Xerox Phaser 3200MFP

The status codes shown in the table below may appear on the
message display. Follow the instructions in the table before calling
for service.  Status Codes XEROX WIDE FORMAT 510dp:

C0.– This code indicates a cutter problem. Follow the instructions on the message display.
C1.–  This code indicates a problem with roll 1. Follow the instructions on the message display.
C2.–  This code indicates a problem with roll 2. Follow the instructions on the message display.
C3.–  This code indicates a problem with roll 3. Follow the instructions on the message display. Continue Reading »
Status Codes XEROX WIDE FORMAT 510dp

To clear a jam in the fuser area:
1. Raise the output tray all the way so that it rests on top of the printer.
WARNING: Do not touch the fuser roll while clearing media jams
in the fuser area. The fuser roll is very hot and can cause severe
burns.

2. Open the fuser drawer all the way.

3. Do one of the following:
• Pull the jammed media out the back of the fuser area. Go to step 7.
• If you cannot pull the jammed media out of the fuser area,
go to step 4. Continue Reading »
Clear Fuser Area Jam XEROX WIDE FORMAT 510dp

The imagePROGRAF W8400 44” printer is a large format printer for office, photo, and graphic arts professionals.

Utilizing a pigment based six plus one ink system (interchangeable matte black), a 4-picoliter ink droplet size, and 2400 x 1200 resolution, the imagePROGRAF W8400 produces exceptional quality output.

The imagePROGRAF W8400 includes the tools needed to easily Create, Process & Print high quality professional large format output.  PosterArtist, one of the many software programs that come with the printer, provides users an intuitive template based poster creation software for any level of skill user. Print complex PostScript® graphic files with Continue Reading »
Entering Service Mode Canon imagePROGRAF W8400

Hard reset procedures for iPAQ h5000 Series and HP iPAQ h3800 Series

1. Hold down the calendar and iTask buttons
2. Then press the reset button for about 6 seconds.
3. After the screen fades, you can verify the hard reset by pressing the power button. Continue Reading »
Hard Reset HP iPAQ h5000 Series and HP iPAQ h3800 Series

Hard Reset procedures for Dell Axim x50 - x50v - x51 - x51v

1. Turn the device ON.
2. Press and hold the power button while you press the reset button for about 6 seconds.
3. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory.
4. Then press the Contacts button. Continue Reading »
Hard Reset Dell Axim x50/x50v/x51/x51v

Hard reset procedures for Dell Axim X3/X3i/X30

1. Press and hold the power button while you press the reset button for about 6 seconds.
2. Release both buttons and you will see a confirmation screen asking you if you would like to clear all data in memory.
3. Then press the Contacts button. Continue Reading »
Hard Reset Dell Axim X3/X3i/X30

Hard reset procedures for HP iPAQ h2000 Series (2210 - 2215)

1. Hold down the Calendar and iTask buttons.
2. Press the reset button on the for about 6 seconds.
3. After the screen fades, release all buttons.

You can verify the hard reset by pressing the power button. If the device does not power on, then you have successfully reset you unit. Now you can connect iPAQ to the AC power or press the reset button again with your stylus. Continue Reading »
Hard Reset HP iPAQ h2000 Series

Hard reset procedures for Mitac Mio 168

1. On the back of the unit, slide the battery switch to OFF.
2. After about 1 minute, slide the battery switch back to the ON position.
3. The unit will restart with the default settings. Continue Reading »
   Hard Reset Mitac Mio 168